Indicators On The Pc - Fujitsu Siemens Computers SCENIC Edition X100 Operating Manual

Operation

Indicators on the PC

The indicators are on the front of the casing. Which indicators are available on your PC depends on
the configuration level you have selected.
1 = Hard disk indicator
2 = Power-on indicator
1 - Hard disk indicator
The indicator lights up when the hard disk drive of the PC is accessed.
2 - Power-on indicator
– The indicator lights green:
The PC is on.
– The indicator lights orange:
The PC is in energy-saving mode. After being switched on with the power button, the PC
switches on or returns to the state it was in before the energy-saving mode.
In an energy-saving mode the PC must not be switched off with the main power
!
switch (if present) or disconnected from the mains, as this may result in data loss.
– The indicator does not light up:
The PC is switched off (power switch at 0 or disconnected from the power supply) or
ready-to-operate. If the PC is ready-to-operate, the PC can be enabled with the ON/OFF
switch.
20
4
3
3 = Floppy disk indicator
4 = CD-ROM indicator
1
2
A26361-K678-Z121-1-7619, edition 1