Fujitsu Siemens Computers SCENIC Edition X100 Operating Manual page 47

► Adjust the required settings on the drive (if necessary, on already-installed drives as well).
► Slide the drive into its bay (1).
► Fasten the drive into place with the screws (2).
► Plug the data and the power supply connectors into the drive. Make sure the polarity is correct.
► Close the casing (see "Closing the casing").
i
It may be necessary to modify the entry for the drive in the BIOS Setup.
A26361-K678-Z121-1-7619, edition 1
1
System expansions
2
39