Switching On Monitor And Pc - Fujitsu Siemens Computers SCENIC Edition X100 Operating Manual

Switching on monitor and PC

► Switch the monitor on (see the operating manual for the monitor).
► Switch the PC on. To do this, follow the instructions below.
Depending on the version, your PC is equipped with a main power switch on the back of
i
the casing in addition to the power button on the front. This differentiates between the
ways to switch on both PC versions.
Switching on PC with devices with main power switch
1 = Main power switch
2 = ON/OFF switch
► Switch the PC on with the main power switch on the back panel.
► Press the ON/OFF switch on the front of the casing.
The power-on indicator lights green and the PC is started.
A26361-K678-Z121-1-7619, edition 1
1
2
0 = PC is switched off
I = PC is ready-to-operate
Preparing for use
13