Using Viewpoint With An External Station; Configuring An External Station - Toshiba Strata CS User Manual

Using ViewPoint with an external station

Configuring an external station _____________________________

6-12
ViewPoint treats external stations just like regular internal stations. You can use
ViewPoint commands that require a phone, place and answer calls, and handle calls in
the Call Monitor using ViewPoint commands. There is no need to "imitate" a station
(as described in "Imitating a station at a remote number" on page 6-10).
Note:
If you want to use ViewPoint call control when answering incoming calls at any
of your routing list's external numbers you still must turn on "imitate a station."
To use ViewPoint with an external station
1.
Start ViewPoint.
2. At the Toshiba Strata CS ViewPoint Logon dialog box, click
expand the dialog box.
3. Click
Station ID
administrator can tell you what it is.
4. Click .
OK
With the proper permission, you can use ViewPoint to change the configuration of
your external station. For example, you can specify a different phone number or IP
address, or change the type of remote phone you have from an IP phone to a regular
phone number.
If your external station is a SIP phone, see the next section, "Configuring a SIP phone."
To configure an external station
1.
Choose
Tools > Options
2.
Click the Phone \ Station Features tab.
3.
Under Destination
External Number.
!
Generic H.323 Device.
!
including Polycom IP phones.
, and enter your external station ID. Your system
. The Options dialog box opens.
, select one of the following types of external station:
Choose for any external station with a phone number.
Choose for any H.323-based IP phone not listed,
to
Options