Table of Contents
Advertisement
14.
: Indicates you are in Stopwatch Mode or the
stopwatch is running
15.
: Indicates training programme is activated
16.
: Indicates the total exercise time
17.
: Indicates zone time is displayed
THE HEART RATE CHEST BELT
The heart rate chest belt is used to count your heartbeat
and transmit the data to the receiver watch. To put it
on,
1. Wet the conductive pads on the underside of the
heart rate chest belt with few drops of water or a
conductive gel to ensure a solid contact.
2. Strap the heart rate chest belt across the chest.
Adjust the strap until the heart rate chest belt sits
snugly below the pectoral muscles for an accurate
heart rate signal.
SE139_EN_R5.indd 6
HINTS
•
The position of the heart rate chest belt affects its
performance. Move the heart rate chest belt along
the strap for the best transmission. Avoid areas with
dense chest hair.
•
In dry, cold climates, it takes the heart rate chest
belt a while to function steadily. This is normal as
sweat could improve the contact with the skin.
EFFECTIVE RANGE
The heart rate chest belt and receiver watch will start
transmitting and receiving signals once batteries are in
place. Both units should be worn or mounted within an
effective distance of 62.5 centimeters (25 inches). If the
signals have become unsteady,
•
Shorten the distance between the heart rate chest
belt and receiver watch.
•
Re-adjust the position of the heart rate chest belt.
•
Check the batteries. Replace them when necessary.
6
6/24/08 6:46:50 PM
Advertisement
Table of Contents
