Saving A Phone Number - Sanyo SCP-3200 User Manual

Note:
You can have multiple pauses in a phone number and combine 2-second
and hard pauses.
To dial or save phone numbers with pauses:
1. Enter the phone number and press Options (right softkey).
2. Select either Hard Pause or 2-Sec. Pause.
(Hard pauses are displayed as a "P" and 2-second pauses as a "T".)
3.
Enter additional numbers.
4.
To dial the number, press
– or –
To save the number in your Contacts, press Options (right
softkey) > Save Phone#.
Note:
When dialing a number with a hard pause, press
numbers.

Saving a Phone Number

Your phone can store up to 500 phone numbers in up to 300
Contacts entries (an entry may contain up to seven numbers).
Each entry's name can contain 32 characters. Your phone
automatically sorts the Contacts entries alphabetically.
To save a number from standby mode:
1. Enter a phone number and press Options (right softkey).
2. Select Save Phone#.
3. Select New Name to create a new Contacts entry for the
number, or From Ph. Book to save the number to an existing
entry. (This step is not necessary on the very first entry in
Contacts.)
4.
Select a label and press
5.
Enter a name for the new entry using the keypad and press
– or –
Search for an existing contact name and press to save the new
number.
6. Press Save (left softkey) to save the entry.
7. Press Done (left softkey) to return to standby mode.
or .
.
to send the next set of
2. The Basics
.
23