Ip Address Setup - Hitron CGN User Manual

Table 3: LEDs
DS Green, blinking
Green, steady
Blue, steady
Off
Power Green
Off
When you turn on the CGN, the LEDs light up in the following order:
Power
US
DS
Status
The ETH 1~4 LEDs light up as soon as there is activity on the relevant port, and
the WIRELESS LED lights up once the wireless network is ready.
USB
WIRELESS
1.4

IP ADDRESS SETUP

Before you log into the CGN's GUI, your computer's IP address must be in the same
subnet as the CGN. This allows your computer to communicate with the CGN.
NOTE: See IP Addresses and Subnets on page 29 for background information.
The CGN has a built-in DHCP server that, when active, assigns IP addresses to
computers on the LAN. When the DHCP server is active, you can get an IP address
automatically. The DHCP server is active by default.
20 20
HITRON CGN USER'S GUIDE
The CGN is searching for a downstream frequency
on the CABLE connection.
The CGN has successfully located and locked onto
a downstream frequency on the CABLE
connection.
The CGN is engaged in channel bonding on the
downstream connection.
There is no downstream activity on the CABLE
connection.
Cable modem is plugged in to an electrical outlet
and is and receiving power
The CGN is not receiving power.
Version 2.0, February 2012. Copyright
Version 2.0, February 2012. Copyright
2012 Hitron Technologies
2012 Hitron Technologies