Ip Address Setup - Hitron CODA-57 User Manual

Table 3: LEDs
US
Green-Blinking
Green-Steady
Blue-Steady
Cyan-Steady
Off
Online
Green-Blinking
Green-On
Off
1.4

IP Address Setup

Before you log into the CODA-57/57-EU's GUI, your computer's IP address must be
in the same subnet as the CODA-57/57-EU. This allows your computer to
communicate with the CODA-57/57-EU.
If your computer is configured to get an IP address automatically, or if you are not
sure, try to log in to the CODA-57/57-EU (see
If the login screen displays, your computer is already configured correctly.
If the login screen does not display, your computer is not configured correctly.
Follow the procedure in
computer to get an IP address automatically. Try to log in again. If you cannot
log in, follow the manual IP address setup procedure again, and set a specific IP
address as shown. Try to log in again.
NOTE: If you still cannot see the login screen, your CODA-57/57-EU's IP settings
may have been changed from their defaults. If you do not know the CODA-
57/57-EU's new address, you should return it to its factory defaults. See
Resetting the CODA-57/57-EU
configured settings are lost.
15 15
Version 1.0, 12/2022. Copyright
Version 1.0, 12/2022. Copyright
Hitron CODA-57/57-EU User's Guide
The CODA-57/57-EU is searching for an upstream
frequency on the CABLE connection.
The CODA-57/57-EU has successfully located and
locked onto a single upstream frequency on the
CABLE connection.
The CODA-57/57-EU is successfully engaged in
channel bonding on the upstream connection.
DOCSIS 3.1
There is no upstream activity on the CABLE
connection.
The CODA-57/57-EU is registering with the service
provider's CMTS.
The CODA-57/57-EU has successfully registered
with the service provider and is ready for data
transfer (seeDOCSIS
The CODA-57/57-EU's cable modem is offline.
GUI Overview
Manual IP Address Setup
on page 18. Bear in mind that ALL user-
on page 19).
on page 17).
on page 16 and set your
2012 Hitron Technologies
2022 Hitron Technologies