Empire Comfort Systems DLCX36SP93N-1 Installation Instructions And Owner's Manual page 15

FIREpLACE INSTALLATION INSTRUCTIONS (continued)
Locating Fireplace
Before setting fireplace into the framed opening, attach the framing
brackets to the fireplace and secure to framing. The framing brackets
may be installed on the fireplace in the flat state. Once the fireplace
is placed into the framed opening, the brackets can be hand bent
over the framing and secured. This allows the fireplace to be
inserted into the pre-framed opening. Different hole locations can
be used for finishing materials with thicknesses of 3/8", 1/2" and
3/4". Secure the brackets with screws provided using two (2) per
framing bracket. See Figure 9.
Framing brackets should fit directly against framing material. Use
at least one (1) nail or screw per bracket to secure in place.
IMpORTANT! Check squareness of all openings of the fireplace
prior to securing to the framed openings. See Figure 10.
FRAMING
NAIL OR OTHER
SUITABLE FASTENER
29004-0-0711
Figure 9
CHECK TO SEE THAT
FIREBOX IS SQUARE PRIOR
TO ATTACHING TO FRAMING
WARNING: WHEN FINISHING THE FIREpLACE, NEvER
OBSTRUCT OR MODIFY THE AIR INLET/OUTLET
OpENINGS IN ANY MANNER. pROvIDE ADEqUATE
CLEARANCES AROUND AIR OpENINGS.
CAUTION: pRIOR TO INSTALLATION, MEASURE THE
F I R E p L A C E A N D v E R I F Y F R A M I N G
RE qU IR EME N TS , ME TH OD S , A ND WAL L
COvERING DETAILS pRIOR TO FRAMING
CONSTRUCTION.
Surround Installation
To complete the installation of the fireplace, a Surround Kit
specifically designed for use with this fireplace must be installed
prior to use. Surround options shown on page 48 are available from
your dealer. Follow the instructions included with the Surround Kit
for proper installation.
Figure 10
Page 15