Url Blocking - Planet XRT-412 User Manual

Protocol
Port Range
You can now configure other advance sections or start using the router (with the advance settings
in place)

3.5.2 URL Blocking

You can block access to some Web sites from particular PCs by entering a full URL address or
just keyword of the Web site.
Parameters
Enable URL Blocking
Add URL Keyword
Remove URL Keyword
You can now configure other advance sections or start using the router (with the advance settings
in place)
This allows you to select UDP, TCP or both protocol
types you want to block.
You can assign up to five port ranges. The router will
block clients from accessing Internet services that use
these ports.
Description
Enable/disable URL Blocking
Fill in "URL/Keyword" and then click "Add". You can
enter the full URL address or the keyword of the web site
you want to block. If you find any typo before adding it
and want to retype again, just click "Reset" and the field
will be cleared.
If you want to remove some URL keyword from the
"Current URL Blocking Table", select the URL keyword
you want to remove in the table and then click "Delete
Selected". If you want remove all URL keyword from the
table, just click "Delete All" button. If you want to clear
the selection and re-select again, just click "Reset".
44