Manual Installation - THOMSON TG508 Setup And User Manual

1 Installation
1.2.1

Manual Installation

Procedure
Proceed as follows:
1 Connect the cables
2 Configure the Thomson Gateway
Connect the cables
Proceed as follows:
1 Connect the Thomson Gateway to the DSL line.
2 Connect the power supply.
3 Turn on the Thomson Gateway.
4 Connect your computer to the Thomson Gateway as described in
Ethernet Cable" on page
Configure the Thomson Gateway
Proceed as follows:
1 Open your web browser.
2 Browse to the IP address of your Thomson Gateway (by default: 192.168.1.254) and click Thomson
Gateway on the menu on the left-hand side.
3 In the Pick a task list, click Setup.
4 The Easy Setup welcome screen appears. This will guide you through the configuration of your Thomson
Gateway. Click Next and follow the instructions. For more information, see
Gateway" on page
6
7.
33.
"1.3 Connecting a Computer Using the
" Setting up your Thomson
E-DOC-CTC-20090507-0001 v1.0