Panasonic KX-TAW848 User Manual page 74

1.7 Extension Settings
• The FWD/DND button light shows the current status as follows:
Off: Both features are not set.
Flashing red slowly: FWD mode
Red on: DND mode
• The system has two modes: (1) FWD/DND Cycle Switch Mode and (2) FWD/
DND Setting Mode. Ask your manager what mode your system is in if you are
not sure.
(1) When in the FWD/DND Cycle Switch Mode :
Pressing the FWD/DND button (fixed button) while in idle status will cycle
the setting as shown below:
(2) When in the FWD/DND Setting Mode :
Pressing the FWD/DND button (fixed button) while in idle status will take
you directly to the programming mode for the FWD/DND setting.
(Refer to " 3.1.2 Settings on the Programming Mode ".)
Note
A FWD/DND button (customized button) is always in FWD/DND Cycle Switch
Mode: the mode cannot be changed.
• If your extension has set this feature, a calling extension will hear DND tone.
• If this feature is set, the Call Forwarding (FWD) feature does not work.
• Specified extensions can override this feature and call DND extensions (DND
Override).
• When intercom calls are set to be handled differently from outside calls (DND
set/cancel), we recommend establishing buttons for both FWD/DND—Outside
calls and FWD/DND—Intercom calls, because:
a) the light patterns of the FWD/DND—Both calls button (including FWD/DND
button [fixed button]) will indicate the setting for either outside calls or
intercoms calls, but not both.
Note
The DND icon on PS display reflects the setting for outside calls only.
b) pressing the FWD/DND—Both calls button (including FWD/DND button
[fixed button]) will not change the FWD or DND mode for intercom calls and
outside calls separately.
Customizing Your Phone
• 3.1.3 Customizing the Buttons
Create or edit FWD/DND (Both calls, Outside calls, Intercom calls) buttons.
74 User Manual
FWD DND Off