Panasonic KX-TAW848 User Manual page 66

1.5 Absence Settings
Call Forwarding (FWD) for your Incoming Call Distribution Group
PT/SLT/PS
Off-hook.
CO line
access no.
Enter destination extension number.
Or enter CO line access number
and then outside phone number.
• The FWD/DND button light shows the current status as follows:
Off : Both features are not set.
Flashing red slowly : FWD mode
Red on : DND mode
• The Group FWD button light shows the current status as follows:
Off : No set
Red on : FWD mode
• The system has two modes: (1) FWD/DND Cycle Switch Mode and (2) FWD/
DND Setting Mode. Ask your manager what mode your system is in if you are
not sure.
(1) When in the FWD/DND Cycle Switch Mode :
Pressing the FWD/DND button (fixed button) while in idle status will cycle
the setting as shown below:
(2) When in the FWD/DND Setting Mode :
Pressing the FWD/DND button (fixed button) while in idle status will take
you directly to the programming mode for the FWD/DND setting.
(Refer to " 3.1.2 Settings on the Programming Mode ".)
Note
A FWD/DND button (customized button) is always in FWD/DND Cycle Switch
Mode: the mode cannot be changed.
66 User Manual
ICD Group: Incoming Call Distribution Group
7 1
Enter 71.
destination
extension no.
OR
outside
phone no.
(Max. 32 digits)
FWD DND
4 Both Calls
OR
5
Outside Calls
OR
Intercom Calls
6
Enter 4 to 6 as Enter 1 to set
you desire. or 0 to cancel.
C.Tone
On-hook.
Enter #.
Off
1
Set
ICD Group
OR
extension no.
Cancel
0
Enter ICD Group
extension number.
For "Cancel",
go on-hook directly.