Before Operating The Telephones; What Kind Of Telephone Can Be Used - Panasonic KX-TAW848 User Manual

1.1 Before Operating the Telephones

1.1 Before Operating the Telephones
1.1.1 Before Operating the Telephones

What Kind of Telephone Can Be Used?

You can use a single line telephone (SLT), such as a rotary pulse telephone or a
Panasonic proprietary telephone (PT) such as the KX-T7735. You can also use a
Panasonic Portable Station (PS), e.g., KX-TD7690. Use the feature depending on the
telephone you are using. If you are using a Panasonic proprietary telephone with a
special feature button such as
operation with the button or display messages for easy programming.
If you use a large display telephone (e.g., KX-T7735), you can follow the displayed
messages to use the features. If your telephone does not have feature buttons and/or a
display, you may operate the PBX by entering a feature number instead. Follow the
operation for your type of telephone.
If you use a Console, you can use the buttons on the Console as the buttons on the
connected proprietary telephone.
Portable Station (PS) Registration
You must register your PS in the PBX and determine its extension number before initial
use. For PS registration, consult your dealer.
Feature Numbers
To use certain features, you need to enter specified feature numbers (and an additional
parameter, if required).
There are two types of feature numbers as follows:
• Flexible feature number
• Fixed feature number
Fixed feature numbers cannot be changed. However, you can change the flexible
numbers to other numbers for easier use. If you want to change the numbers, consult
your dealer. In this manual, the default numbers (factory installed) are used for
operations.
A flexible number is shown as
if you have changed the feature number. Write the new number in the "Feature Number
Table" (Appendix).
12 User Manual
or a display (Display PT) or both, you can follow the
•
(half-shaded key). Use the new programmed number
If you use a Panasonic
proprietary telephone which
does not have feature buttons,
you may change one of the
unused flexible buttons to a
feature button. Refer to " 3.1.3
Customizing the Buttons ".