Enterasys RoamAbout RBT-4102 Configuration Manual page 60

CDP Settings
• Port Status:
–
–
–
4-24 Advanced Configuration
Disable ‐ disables this AP from using CDP.
Enable ‐ enables this AP to use CDP and to send information about itself at the specified
Transmit Frequency.
Auto ‐ enables this AP to use CDP and to send information about itself only when
neighbors request information. Default: Auto
Note: The Port Status overrides the Global Status. Make the same selections for both the global
and port status or make sure the port status settings match the behavior you want