Electrolux Diva Service Manual page 27

6.7.2 Input philosophy: alter program
l
Alter program after successful cycle start
1.
93
S2
LD2
LD6 S6
3 Sekunden betätigen
2.
93
LD2
S2
blinkt
LD6
3.
120
S2
LD2
LD6 S6
1. Cycle running
LD0
Laufzeit
S0
2. Actuate key of the new desired program (in our example S6) for aprox. 3 seconds.
LD0
Laufzeit
S0
LD0 3. After aprox. 6 seconds the previous program LED goes out and the program LED of the new
Laufzeit
desired program is lit.
S0
If a program is altered after an already started cycle the new cycle starts
generally from the beginning!
This is also indicated by the runn time in the display by a repeated
increase of the runn time. Options already selected before will be deleted.
Ä Display LD0 with ON/OFF key, corresponding program LED and run time LED are lit.
Ä Run time is indicated in the display.
Ä Display LD0 with ON/OFF key, run time LED and indication in the display are lit.
Ä Display LED of the running cycle starts flashing.
Ä Display LD0 with ON/OFF key and run time LED are lit.
Ä The display indicates the run time which is to be expected anew.
27
Tastenanordnung Tastenanordnung
senkrecht
S4
S1
1 99
LD0
S2 S5
S1 S2 S3 S4 S5 S6
S3 S6
S0
waagrecht
1 99
S0