Ericsson Dialog 3210 User Manual page 68

Programming
PROGRAMMING OF RINGING SIGNALS
(continued)
To verify a ringing signal on Dialog 3211/3212
Program
Access
Program
PROGRAMMING OF RINGING SIGNAL TONE CHARACTER
Program on Dialog 3210
66
Note: This function is only available on the 3212 telephone.
Press
Press the corresponding line key
A digit (0-6) is shown in the display.
Press to finish programming
There are 10 different programmable ringing signal tone
characters on your telephone, each corresponding to a digit
between 0 and 9.
/Prog
Keep pressed while programming
Press the corresponding digit (0-9)
The telephone rings with the chosen character.
/Prog
Release
Dialog Dialog
3210 3211
Dialog
3212