When this is set, you receive an e-mail notification if a problem or warning occurs in the projector. For information on the contents of the sent Mail,

see

"Reading Problem Mail Notification Function (EB-826WH/825H/85H/84H/84L Only)"

Sub Menu

Mail Notification

SMTP Server

Port Number

Address 1 Setting

Address 2 Setting

Address 3 Setting

You can set whether or not (On/Off) to be notified by e-mail.

You can input the IP Address

for the SMTP Server for the projector.

You can input a number from 0 to 255 in each field of the address. However, the following IP Addresses cannot be used.

127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)

You can input the Port Number for the SMTP Server. The default value is 25. You can input numbers between 1 to 65535.

Input the Email Address and the contents of the Mail to receive notification when an abnormality or warning occurs in the projector. You can enter up to

32 single-byte alphanumeric characters for the Email Address. You can select multiple problems or warnings to be notified about by Mail. You can also

change each Email Address.

p.91

Function

Table of Contents