Select ECO if the images being projected are too bright such as when projecting images in a dark room or onto a small screen. When ECO is selected, the

amount of electricity consumed and the lamp's operating life are changed as follows, and fan rotation noise during projection is reduced. Electrical

consumption: about 20% decrease, lamp life: about 1.2 times longer

You can adjust the Volume. Setting details are saved for each image signal.

Adjust if the Mic Input level is too low to hear from the projector's speaker, or if the level is too high making the audio crack. When the Mic Input Level is

turned down to 0, no audio is output from the speaker.

You can limit the reception of the operation signal from the Remote Control.

When you want to prohibit operation by Remote Control, or if the Remote Receiver has a fluorescent light too close to it, you can make settings to

deactivate the remote receiver you do not want to use or that is experiencing interference.

You can select the item assigned from the Configuration Menu with the Remote Control's [User] button. By pressing the [User] button the assigned

menu item selection/adjustment screen is displayed, allowing you to make one-touch settings/adjustments. You can assign one of the following five

items to the [User] button.

Power Consumption, Info, Progressive, Test Pattern, Resolution, Mic Input Level, Pattern

Function

p.46

p.40

Table of Contents