Info Menu (Display Only) - Epson EB-826WH User Manual

List of Functions

Info Menu (Display Only)

Lets you check the status of the image signals being projected and the status of the projector. Items that can be displayed vary depending on the image signal
and Source currently being projected as shown in the following screen shots. Depending on the model used, some input sources are not supported.
p.16
s
Computer Signal/Component Video
Display
Sub Menu
Lamp Hours
Source
Input Signal
Resolution
Video Signal
g
Refresh Rate
Sync Info
Status
Serial Number
* The cumulative use time is displayed as "0H" for the first 0 to 10 hours. 10 hours and above is displayed as "10H", "11H", and so on.
g
/USB/USB
You can display the cumulative lamp operating time
When it reaches the lamp warning time, the characters are displayed in yellow.
You can display the Source name for the connected equipment currently being projected.
You can display the content of Input Signal set in the Signal menu according to the Source.
You can display the Resolution.
You can display the content of Video Signal set in the Signal menu.
You can display the Refresh Rate.
You can display the image signal Info.
This information may be needed if service is required.
This is Info about errors that have occurred on the projector.
This information may be needed if service is required.
Displays the projector's serial number.
g g
Composite video /S-Video
Function
* .
76
LAN