Changing Settings Using a Web Browser (Web Control)
Procedure
A
Web Control is displayed.
B
Click Web Remote.
C
The Web Remote screen is displayed.
Name
A
Turns the projector power On or Off.
[t] button
s Quick Start Guide
B
Each time the button is pressed, the image changes
[Computer] button
between the Computer1 and the Computer2 input port.
p.17
s
Function
Name
C
[Video] button
Each time the button is pressed, the image changes
between the Video and the S-Video input port. s
D
Images are paused or unpaused. s
[Freeze] button
E
Turns the video and audio on or off. s
[A/V Mute] button
F
[Page] buttons
This button moves the page Up/Down when using the
wireless mouse function, or when projecting an
([Down] [Up])
application compatible with Page Up/Down from LAN as
the source. s
Operation Guide
G
[Source Search]
Changes to the next input source that is connected to the
button
projector and is sending an image. s
H
Changes to the image projected with EasyMP Network
[LAN] button
Projection. When projecting via Quick Wireless
Connection using the optional Quick Wireless
Connection USB Key, this button switches to that image.
p.17
s
I
[USB] button
Each time the button is pressed, it changes to the image
from equipment connected to USB Display/USB (TypeA)
Port. s
J
[a] Decreases the Volume.
[Volume] buttons ([a]
[b])
[b] Increases the Volume.
s Quick Start Guide
Function
p.35
p.34
p.42,EasyMP Network Projection
p.16
p.17
Caution
Do not start at high volume.
A sudden excessive volume may cause loss of
hearing. Always lower the volume before powering
off, so that you can power on and then gradually
increase the volume.
49
p.17