Other Information - Chevrolet 2010 Silverado Owner's Manual

Sending a Number During a Call
g
1. Press . The system responds with Ready
followed by a tone.
2. Say Dial . The system responds with Say a
number to send tones followed by a tone.
3. Say the number to send.
If the system clearly recognizes the number it
responds with OK, Sending Number and the
dial tones are sent and the call continues.
If the system is not sure it recognized the
number properly, it responds Dial Number,
Please say yes or no? followed by a tone.
If the number is correct, say Yes . The system
responds with OK, Sending Number and the
dial tones are sent and the call continues.
Sending a Stored Name Tag During a Call
g
1. Press . The system responds with Ready
followed by a tone.
2. Say Send name tag. The system responds with
Say a name tag to send tones followed by a tone.
3. Say the name tag to send.
If the system clearly recognizes the name tag it
responds with OK, Sending <name tag> and
the dial tones are sent and the call continues.
If the system is not sure it recognized the name
tag properly, it responds Dial <name tag>,
Please say yes or no? followed by a tone.
If the name tag is correct, say Yes . The
system responds with OK, Sending <name
tag> and the dial tones are sent and the call
continues.
Clearing the System
Unless information is deleted out of the in vehicle
Bluetooth system, it will be retained indefinitely. This
includes all saved name tags in the phonebook and
phone pairing information. For information on how to
delete this information, see the above sections on
Deleting a Paired Phone and Deleting Name Tags.

Other Information

®
The Bluetooth
®
Bluetooth SIG, Inc. and any use of such marks by
General Motors is under license. Other trademarks and
trade names are those of their respective owners.
See Radio Frequency Statement on page 8 18 for FCC
information.
I n f o r ma t i o n P r o v i d e d b y :
word mark and logos are owned by the
4-131