Stabilitrak ® Indicator Light - Chevrolet 2010 Silverado Owner's Manual

2010 silverado
Hide thumbs Also See for 2010 Silverado:
Table of Contents

Advertisement

If the ABS light stays on, turn the ignition off. If the light
comes on while driving, stop as soon as it is safely
possible and turn the ignition off. Then start the engine
again to reset the system. If the ABS light stays on,
or comes on again while driving, the vehicle needs
service. If the regular brake system warning light is not
on, the vehicle still has brakes, but not antilock brakes.
If the regular brake system warning light is also on, the
vehicle does not have antilock brakes and there is a
problem with the regular brakes. See Brake System
Warning Light on page 4 37.
For vehicles with a Driver Information Center (DIC), see
DIC Warnings and Messages on page 4 63 for all
brake related DIC messages.
StabiliTrak
If it does not, have the vehicle serviced by your dealer.
If the system is working normally the indicator light then
goes off.
If the light comes on and stays on while driving, there
could be a problem with the StabiliTrak
vehicle might need service. When this warning light is
on, the StabiliTrak
wheel spin.
The light flashes if the system is active and is working
to assist the driver with directional control of the vehicle
in difficult driving conditions.
See StabiliTrak
information.
I n f o r ma t i o n P r o v i d e d b y :
®
Indicator Light
For vehicles with the
StabiliTrak
light comes on briefly
while starting the engine.
®
®
system is off and does not limit
®
System on page 5 6 for more
®
system, this
system and the
4-39

Advertisement

Table of Contents
loading

Table of Contents