INITIALIZING THE ITP-5121D
Initially the ITP-5121D IP keyset will need to be setup to operate within the users
network.The Setup Menu is also used to make changes to the keyset, in the event
that the system information should change. The option chosen via scroll key will
be highlighted.
The station numbers will be automatically set by the OfficeServ 100, OfficeServ
500, and the OfficeServ 7000 Series systems once the necessary information has
been entered into the IP keyset. Enter ID and password of the server, as described
below to register the phone.
See your system administrator for specific Network and Server addresses. The
addresses necessary to set up the ITP-5121D are:
•
IP Address of the ITP
•
Network Gateway Address
•
Subnet Mask
•
IP Address of System's MCP
•
User ID
•
Password
To get to the Set-Up Menu, unplug the power from the ITP-5121D phone or
unplug the LAN cable if using Power over Ethernet, press and hold the MENU but-
ton while plugging in the power cord or LAN cable if using Power over Ethernet
back into the phone. Now release the MENU button.
>1.SYSTEM EASY WIZARD
2.SYSTEM INFORMATION
Other items not shown on screen when scrolling down (press down arrow on nav-
igation disc).
3.NETWORK SETUP
4.LOAD & UPGRADE SETUP
6.FACTORY RESET
7.REBOOT
ITP-5121D SETUP
5.SYSTEM SERVER SETUP
6.FACTORY RESET
9