Samsung OfficeServ ITP-5121D User Manual page 22

System Server Setup
The fifth item [5. SYSTEM SERVER SET UP] sets or modifies settings related to
registering the phone to the MCP. You can obtain this information from your sys-
tem administrator. The screen below is displayed.
1.SERVER IP ADDRESS
You can set/modify the IP address of the MCP at the [1. SERVER IP ADDRESS] item.
The screen below is displayed when you enter the item. The server IP is the IP
address of the MCP2/MCP.
INPUT SERVER IP ADDRESS
xxx.xxx.xxx.xxx
You can confirm the current IP address of the MCP at the LCD panel. The address
is left blank if it is not set. Use the dial buttons from [0]-[9], and [,] to set the IP
address and press the [ENTER] button among the navigation buttons to save and
exit. Select the [2. SERVER ID] item.
INPUT SYSTEM ID
You must input the ID assigned to your ITP phone. See your phone system admin-
istrator to get this value. Press the [ENTER] button to save and exit. Select the [3.
SERVER PASS] item.
INPUT SYSTEM PASSWORD
You must input the password associated with your ID. See your phone system
administrator to get this value. Press the [ENTER] button to save and exit.
Completion of Settings
From the main menu, select the seventh item [7. REBOOT] to save all modified
settings and reboot the ITP-5121D phone.
15