Table of Contents
Advertisement
Multimedia Messages
Setup
(Menu 2.8)
You can change the default settings for sending or
receiving multimedia messages.
The following options are available:
Delivery Report: when this option is enabled,
the network informs you whether or not your
message has been delivered.
Read Reply: when this option is enabled, your
phone sends a request for a reply along with your
message to the recipient.
Auto Download: you can set whether or not
your phone retrieves new incoming messages
from the MMS server without notifications. When
this option is enabled, the phone automatically
retrieves new messages from the server. As soon
as you receive a message, you can use more
options while you are reading. See page 93 for
further details about the options.
Message Acceptance: you can specify the
category of messages you want to receive.
Hide ID: when this option is enabled, your phone
number does not display on the recipient's phone.
Expiry Date: you can select the length of time
your messages are stored in the message centre
after they are sent.
Delivery Time: you can set a delay time before
the phone sends your messages.
Priority: you can select the priority level of your
messages.
Report Allowed: when this option is enabled, the
sender of an incoming message receives a
delivery report from the network.
102
Page Duration:
you can set how long one page
of the sent message displays on the message
presentation screen. After a specified time, the
display automatically scrolls to the next
MMS Profile
(Menu 2.9)
In this menu, you can configure various network
settings that are required when you send or
receive multimedia messages.
Notes:
• The last profile you accessed is automatically
activated for sending messages.
• If you change the MMS settings without first
checking with your service provider, the MMS
feature may not work properly.
The following options are available for each
profile:
Profile Name: enter a name that you wish to
assign to the MMS server.
Connection URL: enter the address of your MMS
server.
Security: select a data transmission mode.
Choose Secure to protect your data against
unauthorised access; otherwise, choose Non-
Secure.
IP Address: enter the gateway address required
to connect to the MMS server.
User Name: enter the user ID required to
connect to the MMS server.
Multimedia Messages
page.
103
Advertisement
Table of Contents
