Center Speaker Distance Setting - Pioneer VSX-D510 Operating Instructions Manual

MEMO:
• The initial setting is "
100 Hz
• If all speakers (front, center, and surround) are set to
"Large" in SPEAKERS setting mode, the crossover
frequency cannot be set because there are no "Small"
speakers ( appears in the display).
***
LFE attenuator setting mode
Dolby Digital and DTS audio sources include ultra-low
bass tones. Set the LFE attenuator as needed to prevent
the ultra-low bass tones from distorting the sound from
the speakers.
Press % or fi to set the attenuation level (0
dB, 10 dB or ** dB(∞)).
0 dB 10 dB
∞
(display "
**
MEMO:
• The initial setting is "
0 dB
∞
• When is selected (
**
is not available.
Low cut filter ON/OFF setting mode
Turn the low cut filter
ON
output through the subwoofer.
Press % or fi to select low cut filter ON or
OFF.
MEMO:
• The initial setting is "
OFF
• If the SUBWOOFER is set to "
SUBWOOFER ON/OFF setting mode, the low cut
filter cannot be set.
".
")
".
appears in the display), LFE
when distorted sound is
".
" in the
OFF
FRONT speakers distance setting
mode
Sets the distance from the FRONT speakers to the
listening position.
Press % or fi to set the distance of the
FRONT speakers from the main listening
position (within a 9.0 m range).
MEMO:
• The initial setting is 3.0 m.
• One step equals about 0.3 m.

CENTER speaker distance setting

mode
The center speaker is normally placed directly in front of
the listening room and is thus closer to the listening
position than the Front speakers. This means that the
sound from the center speaker will be heard before the
Front speakers. To prevent this, set the center speaker
distance setting to delay the sound from the center
speaker so that the sound from the Front and center
speakers will be heard at the same time.
Press % or fi to set the distance of the
CENTER speaker from the main listening
position (within a 9.0 m range).
MEMO:
• The initial setting is 3.0 m.
• When " " is selected in SPEAKERS setting mode,
C
*
the center distance cannot be set.
• One step equals about 0.3 m.
Preparations
13
En