Lfe Attenuator Setting; Front Speaker Distance Setting; Center Speaker Distance Setting; Surround Speaker Distance Setting - Pioneer VSX-D41 Operating Instructions Manual

Audio/video multi-channel receiver
Table of Contents

Advertisement

Setting up the receiver
100Hz
200Hz
100 Hz
Sends bass frequencies below 100 Hz to the
subwoofer (or L speakers).
150 Hz
Sends bass frequencies below 150 Hz to the
subwoofer (or L speakers).
200 Hz
Sends bass frequencies below 200 Hz to the
subwoofer (or L speakers).
If all speakers (front, center, and surround)
are set to L, the crossover frequency can't
be set because there are no S speakers
(
appears in the display).

LFE attenuator setting

• Default setting: 0 dB
Dolby Digital and DTS audio sources include
ultra-low bass tones. Set the LFE attenuator as
necessary to prevent the ultra-low bass tones
from distorting the sound from the speakers.
Use ' or ' to set the attenuation level
(0 dB, 10 dB or
dB(
0 dB
(displays
When
is selected (
display), LFE is not available.
150Hz
)).
10 dB
)
appears in the

Front speaker distance setting

• Default setting: 10 ft.
Sets the distance from the front speakers to the
listening position.
Use ' or ' to set the distance of the
front speakers from the main listening
position (within a 30 foot range).

Center speaker distance setting

Default setting: 10 ft.
The center speaker is normally placed directly
in the front of the listening room and closer to
the listening position than the front speakers.
This means that the sound from the center
speaker will be heard before the front speakers.
To prevent this, set the center speaker distance
setting to delay the sound from the center
speaker so that the sound from the front and
center speakers will be heard at the same time.
Use ' or ' to set the distance of the
center speaker from the main listening
position (within a 30 foot range).
When C is selected in the speaker setting,
the center distance can't be set.
Surround speaker distance set-
ting
• Default setting: 10 ft.
Like the center speaker, you should set the
distance of the surround speakers accurately to
hear sounds coming from both front and
surround speakers at the same time.
Use ' or ' to set the distance of the
surround speakers from the main listening
position (within a 30 foot range).
06
31
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vsx-d511Vsx-d411

Table of Contents