Table of Contents
Advertisement
2
Setup
Custom Settings
Setting the Dialling Mode (Tone/Pulse)
Your machine is initially set to TONE. If you are using a PULSE dial line, you can change the
setting to PULSE by following the steps below.
1
Press Menu/Set, 1, 1. The screen prompts you to select TONE or PULSE.
2
to select the dialling mode, and press Menu/Set when the screen displays the
Rotate
dialling mode you want.
3
Press Stop to exit.
Although this equipment can use either Pulse or Tone signalling, only the
performance of the Tone signalling is subject to regulatory requirements for
correct operation. It is therefore strongly recommended that the equipment is set
to use the Tone signalling for access to public or private emergency services. The
Tone signalling also provides faster call set up.
Setting the Date and Time
The screen displays, the date and time you set, whenever the machine is in stand-by mode. It will
print the date and time on every fax you send.
In the event of a power failure, the machine maintains date and time information for about 15 hours.
Most other settings remain unaffected.
1
Press Menu/Set, 1, 2.
2
Enter the two digits of the year, and press Menu/Set. "02" is registered as 2002 in the machine.
3
Enter two digits for the month and press Menu/Set.
4
Enter two digits for the day and press Menu/Set.
5
Enter the time in 24 hour format and press Menu/Set.
6
Press Stop to exit.
Setting the Station ID
You can store your name and fax number, which will be printed on all fax pages that you send.
It is important that you enter the fax and telephone numbers in the internationally standardised
format, i.e. in accordance with the following strict sequence:
- The "+" (plus) character (by pressing
- Your Country Code (e.g. "44" for the United Kingdom, "41" for Switzerland)
- Your local area code minus any leading "0" ("9" in Spain)
- A space
- Your number on the local exchange, using spaces to aid readability as appropriate.
13
Chapter 2
key)
Advertisement
Table of Contents
