Changing Remote Access Code; Remote Commands; Retrieve A Fax; Record A Memo - Brother FAX-T78 Owner's Manual

Changing Remote Access Code

1
Press Menu/Set, 8, 7.
2
Enter a three-digit number from 000 to 900.
The cannot be changed.
3
Press Menu/Set.
4
Press Stop to exit.

Remote Commands

Listen to Voice Messages
Press 9 1.
then to Repeat a message press 1.
Skip to next message, press 2.
Stop playing the message press 9.

Record a Memo

Press 9 2.
Wait for the beep, then speak.
then to Stop recording – press 9.
79
Erase All Messages
Press 9 3. If you hear three beeps, all messages
have not yet been heard, and the messages
will not be erased.
Play/Record Outgoing Message
Press 9 4.
then to Play Message Centre OGM press 1 1.
Play F/T OGM press 1 2.
Record new Message Centre OGM
press 2 1, then speak after beep.
press 9 to stop.
Record new F/T OGM press 2 2,
then speak after beep. press 9 to stop.
Change Paging/Fax Forwarding Setting
Press 9 5.
then to Turn feature off press 1.
Enter Fax Forwarding press 2.
Enter Paging press 3.
2
Program Fax Forward Number
press 4. Enter the new number of
the remote fax machine where
you want your fax messages
forwarded, and then press # #.
Press 9 6 1 after two short beeps,
then enter the number of remote
fax machine, and then # # to
retrieve Memory Status List.

Retrieve a Fax

Press 9 6.
then to Print a Memory Status List press
1, then enter the number of remote
fax machine, and then # #. After
the beep, hang up and wait.
Retrieve all faxes press 2, then
enter the number of remote fax
machine, and then # #. After the
beep, hang up and wait.
Erase all fax messages press 3,
3 4