General Printing Problems; Colors On Printout Differ From Colors On Screen; Dos Print File Takes Too Long To Print; Dos Print Job Does Not Print - Lexmark 3200 User Manual

General printing
problems
Problem: Colors on printout differ from
colors on screen
What to do:
To more closely match the colors on your
printouts with the colors on your screen, select
the correct Document Type or Document Color.
To select Natural Color as the Document Type in
Windows 95, 98, 3.1, or 3.11:
1 From the application's File menu, click
Print (or Printer) Setup.
2 In the Printer Setup dialog box, click the
Properties, Options, or Setup button
(depending on the application).
The Lexmark 3200 dialog box appears.
3 Click the Color/Quality tab.
4
Make sure Natural Color is selected.
To select Natural (Screen Match) as the
Document Color in Windows NT 4.0:
1 From the application's File menu, click
Print (or Printer) Setup.
2 In the Printer Setup dialog box, click the
Properties, Options, or Setup button
(depending on the application).
The Lexmark 3200 dialog box appears.
3 Click the Advanced tab.
4
From the Document Color selection, make
sure Natural (Screen Match) is selected.
52
Troubleshooting
Problem: DOS print file takes too long to
print
What to do:
If you are attempting to print a DOS file by
sending it to the port to which the printer is
connected, use the DOS Copy command. Avoid
using the DOS Print command. The DOS Print
command causes printing delays.
Problem: DOS print job does not print
What to do:
Check the following items:
• Make sure the Power light is on.
• Follow the steps for your operating system to
make sure the DOS Printing option is
selected:
Windows 95, 98, 3.1, or 3.11:
1 From the printer's Control Program, click
the Options tab.
2 Make sure Disable CJ3200 DOS Printing
is not checked.
Windows NT 4.0:
1 Open the printer properties folder:
a In the Windows Printer folder, right-
click the Lexmark 3200 Color
Jetprinter icon.
b In the sidebar menu, click Properties.
c
Choose the Device Settings tab.
2
From DOS Printing, click DOS Printing.
3
In the Change DOS Printing Setting area,
click Enabled.
4
Click OK.