Changing Print Settings For Dos Applications - Lexmark 3200 User Manual

Windows NT 4.0
a
From the Start menu, click Settings.
b
Click Printers.
c
Right-click the
icon.
A sidebar menu appears.
d Click Properties.
e Click the
f
Make sure DOS Printing is enabled.
Note:
g Click OK.
2
Start your application from DOS.
For help, see your Windows
documentation.
3
Install the HP DeskJet 500C as the current
printer in the DOS application from which
you are printing.
Some applications offer a color or black
(mono) version of the HP DeskJet 500C
driver. Choose the black (mono) version if
66
Printing from DOS
Lexmark 3200
Device Settings tab.
Lexmark 3200 Series ColorFine Properties
Ports Scheduling
General
Security Device Settings Cartridges
Lexmark 3200 Series ColorFine Device Settings
DOS Printing
DOS Printing <Enabled>
Add line feed to carriage return: <No>
Character Set <PC-8>
DOS Font <Courier 10>
Restore DOS Defaults
Help...
Change 'DOS Printing' Setting
Enabled
Disabled
OK
To print to non-Lexmark printers,
you must disable this option.
you are printing in black only. Choose the
color version if you are printing in color
and black.
If your application does not offer the HP
printer
DeskJet 500C printer driver, install the
HP DeskJet 500 printer driver. You will
not be able to print in color with the HP
DeskJet 500 printer driver.
For help installing a printer, see your
application user's documentation.
You can use the printer driver for your
Sharing
Lexmark 3200 Color Jetprinter to change
printer settings that are not in your
application. For help, see "Changing print
settings for DOS applications."
4
Print as you normally would from your
application.
Changing print settings for
DOS applications
If possible, use options in your DOS application
to change printer settings. Use the following
Cancel steps only if you want to change a printer setting
that does not exist in your DOS application.
Settings in your DOS application override
settings in the driver.