Connecting Devices - HP Integrity rx2600 Getting Started Manual

Setting Up and Using Your System

connecting devices

keyboard, mouse and power
Å
1–8
Before connecting any cords or cables to your system, please read the
Warning Notices in the front of this manual.
The rx2600 and zx6000 systems ship with a USB keyboard and
mouse.
»
Plug the keyboard and mouse into USB connectors on the rear
panel of the computer. (Ports are labelled.)
There are two power receptacles on the rear panel of the system.
»
If you purchased your system without a second power supply,
cover the second receptacle (PWR2) with a plastic cap.
WARNING: For your safety always connect equipment to a grounded wall
outlet. Always use a power cord with a properly grounded plug, such as the
one provided with the system, or one in compliance with your national safety
standards. This equipment can be disconnected from the power by removing
the power cord from the power outlet. The equipment must be located close to
an easily accessible power outlet.
HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide