Set Administrator Password - HP Integrity rx2600 Getting Started Manual

HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide
security/password menu
You can set administrator and user passwords to provide different
levels of access to the system firmware:
The Administrator can access and change all settings in the EFI
Boot Manager program and can run the EFI shell.
The User can access basic functions in the EFI Boot Manager.
NOTE: These are not OS passwords. These passwords limit access to
the firmware interface only. For information on setting OS passwords,
see your OS user guide.
To add, change or delete passwords:
Security/Password Menu
1. Select
2. Select either:
Set Administrator Options
Set User Options
3. Select:

Set Administrator Password

set a new password.
Enable/disable Password
is required.
Help
for assistance.
When you are finished, select
4.
Setting Up and Using Your System
.
Set User Password
or
to specify whether a password
Exit
.
to
1–23