Local I/O Cable - HP ProLiant BL20p Generation 3 Maintenance And Service Manual

Connectors, LEDs, and Switches
Table 4-2: System Board Components and Connectors
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14

Local I/O Cable

Use the local I/O cable to perform some server blade configuration and diagnostic
procedures. The I/O port only accepts the local I/O cable.
4-4
Description
Power button/LED board connector
SCSI backplane board connector 1
Processor socket 2
Smart Array 6i Controller
Standard NIC Mezzanine card
Smart Array 6i 128-MB Battery-Backed Write
Cache Enabler (Optional)
Power converter module
HP ProLiant BL20p G3 Fibre Channel adapter
DC filter module
DIMM slots (4)
System Battery
Processor socket 1 (populated)
SCSI backplane board connector 2
Fan connectors
CAUTION: Disconnect the local I/O cable from the port when not in use. The port and
connector do not provide a permanent connection. Rear iLO connector performance degrades
when the local I/O cable is in use, even when the iLO connector on the cable is not in use.
HP ProLiant BL20p Generation 3 Server Blade Maintenance and Service Guide