HP ProLiant BL20p Generation 3 Maintenance And Service Manual page 24

1. With the processor locking lever raised, insert the processor with the edges properly
aligned (1).
2. Lower the processor locking lever (2).
Figure 2-9: Installing the processor
3. Remove the thermal interface media cover from the new heatsink.
Figure 2-10: Removing the thermal interface media cover
HP ProLiant BL20p Generation 3 Server Blade Maintenance and Service Guide
CAUTION: After the cover is removed, do not touch the thermal interface media. Touching
the thermal interface media could cause processor overheating.
Removal and Replacement Procedures
2-13