Firmware Upgrades For Management Modules - HP ProLiant BL20p Generation 3 Maintenance And Service Manual

HP ProLiant Essentials
Rapid Deployment Pack
(RDP)
ROM-Based Setup Utility
(RBSU)

Firmware Upgrades for Management Modules

For information about upgrading server blade management module or power management
module firmware, refer to the HP website:
http://welcome.hp.com/country/us/en/support.html
HP ProLiant BL20p Generation 3 Server Blade Maintenance and Service Guide
The optional HP ProLiant Essentials RDP is the
preferred method for rapid, high-volume server
blade deployments. The RDP includes Altiris
eXpress Deployment Server and the SmartStart
Scripting Toolkit.
RBSU configures the hardware installed in the
server blade. This utility enables users to perform
the following functions:
Store configuration information in nonvolatile
•
memory
Manage memory installation, processor
•
upgrades, network interface cards, and mass
storage devices
Assist in installing an operating system
•
Configure ports and IRQs, if required
•
Diagnostic Tools
Install the CD in the CD-ROM
drive of the administrator
workstation or client PC and refer
to the documentation that ships
with the software.
Run RBSU by pressing the F9
key during POST.
3-3