Smart Array 6I Controller - HP ProLiant BL20p Generation 3 Maintenance And Service Manual

Removal and Replacement Procedures
4. Install the heatsink (1) and close the heatsink locking levers (2).
Figure 2-11: Installing the heatsink

Smart Array 6i Controller

To remove the Smart Array 6i Controller:
1. Power down the server blade and remove it from the server blade enclosure. Refer to the
"Server Blade Preparation" section in this chapter.
2. Remove the access panel. Refer to the "Access Panel" section in this chapter.
2-14
CAUTION: The heatsink is not reusable and must be discarded if removed from the
processor after application.
HP ProLiant BL20p Generation 3 Server Blade Maintenance and Service Guide