HP ProLiant BL20p Generation 3 Maintenance And Service Manual page 16

To service internal server blade components:
1. Identify the proper server blade in the server blade enclosure.
2. Remove power from the server blade in one of the following ways:
— Use the Virtual Power Button feature in the iLO Remote Console to power down the
— Press the power button on the front of the server blade. Be sure that the server blade
Figure 2-1: Pressing the power button
HP ProLiant BL20p Generation 3 Server Blade Maintenance and Service Guide
server blade from a remote location. Be sure that the server blade is in standby mode
by observing that the power LED is amber.
is in standby mode by observing that the power LED is amber.
Removal and Replacement Procedures
2-5