Selecting A Media Source; 2-Zone Function - Clarion NX700 Owner's Manual & Installation Manual

Selecting a Media Source

Changing the source mode
1. Press the [SRC] button to display the Source
screen.
2. Touch the desired Source key you wish to
change to.
The system is switched to the corresponding
source media mode.
Note:
• The Source keys have no effect in the Tel mode.
Touch the [[] key at top left of the Phone Menu
screen to cancel the Tel mode; this will resume the
last operation mode.
Available media sources
Source Corresponding
mode source media
Tuner mode Tuner mode
1
Sirius mode* Sirius mode
1
XM mode* XM mode
2
DVD mode* DVD Video mode
CDDA mode
MP3/WMA/AAC
mode
DivX mode
3
USB mode* iPod mode
USB Memory mode
AUX mode AUX mode
Tel mode Tel mode
Navi mode Navi mode
20
NX700
Refer to
mode
page 21
page 36
page 36
page 23
page 29
page 30
page 33
page 39
page 42
page 44
page 44
page 43
*1:These keys are displayed only when the
Sirius tuner and/or XM tuner are connected to
this unit.
*2:The source media mode to be selected differs
depending on the data format of the disc set
in the DVD player. When no disc is set, "No
Disc" will be displayed.
*3:The source media mode to be selected differs
depending on the type of the USB media
device connected. When no USB media
device is connected, "No Media" will be
displayed.
Note:
• When the USB mode is selected, video images
input from the iPod video input terminal will be
output to the rear monitor. This is normal.

2-Zone Function

About the 2-Zone function
The 2-Zone function is a function that assigns
separate source output to the Main zone (this
unit) and Sub zone (the optional rear monitor) by
simultaneously playing two sources in this
system. Therefore, the rear passengers are
allowed to enjoy a different video source from the
source played on the operation panel of this unit.
• The source sounds of the Main zone are output
from the speakers of the vehicle side, and
those of the Sub zone are from the optional
headphone systems.
• Controlling a source assigned to the Sub zone
can be made by using the optional remote
control unit. To control it from this unit, once
assign the same source to the Main zone, then
control it.
• When a media without video images is played
on the Sub zone, a black screen is output to the
rear monitor.
Note:
• When an interrupt of the navigation system arises
during the 2-Zone function is turned on, the sound
of the Main zone is muted, but the sound of the
Sub zone is output normally.
• When it arises during the 2-Zone function is turned
off, the audio signals to the 4ch speakers are
attenuated, and the voice from the navigation
system is output from the front two speakers.
• You cannot operate the 2-Zone function during the
interrupt of the navigation system.
• When the same source is assigned for Main and
Sub zones, operations in a zone are also applied
for another zone.