Enabling Safety Mode; Pausing The Active Route; Deleting The Next Via Point From The Route - Clarion NX700 Owner's Manual & Installation Manual

3.7 Enabling Safety Mode

This feature is available in Advanced mode only.
Safety Mode disables the touch screen above 10 km/h (6 mph) to keep your attention on the road. While
driving, you will not be able to set a new destination or to change settings. The only screen control that
remains enabled is the gesture that puts you back on the Map screen.
The procedure is explained starting from the Map screen.
Tap the following buttons:

3.8 Pausing the active route

You do not need to pause the active route: when you start driving again, Clarion Mobile Map restarts the
voice instructions from your position.

3.9 Deleting the next via point from the route

The easiest way to delete the upcoming route point (the next via point) is to open the Route Information
screen by tapping the Turn Preview field (
.
Alternatively, you can do it through the Navigation menu:
.
, ,
) on the Map screen, and then tapping
, .
, , ,
46