Selecting The Destination From Your Favorites; Selecting The Destination From The Pois - Clarion NX700 Owner's Manual & Installation Manual

3.1.3 Selecting the destination from your Favorites

You can select a location that you have already saved as a Favorite to be your destination.
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
(Advanced mode).
2. Tap the Favorite that you want to set as your destination.
3. The map appears with the selected point in the middle. Tap
calculated, and you can start navigating.

3.1.4 Selecting the destination from the POIs

You can select your destination from the POIs included with Clarion Mobile Map or from the ones you
have previously created.
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
2. Select the area around which the POI should be searched for:
x
: The POI will be searched for around a given address.
x
: The map appears with the Cursor in the middle. Modify the location of the Cursor if
necessary, then tap
x
x
x
of the detour it adds to the active route. This can be useful if you search for a later stopover
that causes only a minimal detour, for example upcoming gas stations or restaurants.
3. You can narrow the search with the following:
x
Select the POI group (e.g. Accommodation), and after that, if needed, select the POI
subgroup (e.g. Hotel or Motel).
(Advanced mode) from the Cursor menu. The route is then automatically
. The POI will be searched for around the given location.
: The POI will be searched for around the current GPS position.
: The POI will be searched for around the destination of the active route.
: The POI will be searched for not around a given point, but by the size
(Simple mode) or
(Simple mode), or
,
(Simple mode) or
, (Advanced mode).
40