Creating A Multi-Point Route (Inserting A Via Point) - Clarion NX700 Owner's Manual & Installation Manual

6. The map appears with the selected point in the middle. Tap
calculated, and you can start navigating.

3.2 Creating a multi-point route (inserting a via point)

Multi-point routes are created from simple routes, so a route must be active first. One of the ways of
expanding the route is to keep the destination, and to add via points (intermediate destinations).
This feature is available in Advanced mode only.
1. Select a new location as you did in the previous sections. This will be the additional destination in
the route.
2. The map appears with the selected point in the middle, and the Cursor menu opens automatically.
3. Tap
destination of the route.
4. [optional] To add more points to the route, repeat the above steps as many times as you like.
If you insert a via point in a route that is already a multi-point route, you will automatically be taken to the
Edit Route screen where you can determine the position of the intermediate route point. When you enter
the screen, the new via point is placed as the first via point to be reached. The new point is the
highlighted point in the list.
You have the following options:
Button
Every time a new point is added, the route is recalculated automatically, and you can start navigating right
away.
(Advanced mode) from the Cursor menu. The route is then automatically
to add the point as an intermediate destination preceding the final
The selected point moves up in the list (becomes a via point to be reached earlier).
Tap this button repeatedly, and the point becomes the start point of the route
(when routing from a given location) or the first via point to reach (when routing
from the GPS position).
The selected point moves down in the list (becomes a via point to be reached
later). Tap this button repeatedly, and the point becomes the final destination of
the route.
Tap this button to reverse the route. The start point becomes the destination, the
destination becomes the start point, and all via points are to be reached in the
opposite order than before.
Tap this button to optimize the route. The start point and the destination remain at
their position, but the via points are reordered to make the shortest possible route.
Tap this button to remove the selected point from the route. The route remains as
it was before adding the new point.
Action
(Simple mode) or
43