Clarion NX700 Owner's Manual & Installation Manual page 136

Blue line
Return to GPS
(appears when GPS position is
available and you have moved
the map)
Enable Smart Zoom (replaces
the previous button if there is
no GPS position or the map
has not been moved)
Zoom preset buttons (available
in Advanced mode only)
Tilt preset buttons (available in
Advanced mode only)
Current GPS position
nearest road)
Cursor (selected map location) n/a
Lane information
Signpost information
Active route
Map scale (2D map only)
Speed limit
position
Tap this button to move the map back
to the current GPS position. If the map
has been
rotation is also re-enabled.
Tap this button once to enable Smart
Zoom.
Tap&hold the button to set the zoom
limits of Smart Zoom.
Tap one of the preset buttons to set the
zoom level to a fix, predefined value.
Smart Zoom is disabled. These buttons
are available in 2D mode.
Tap&hold any of the buttons to set its
value to the current zoom level, or to
reset it to its original value.
Tap one of the preset buttons to set the
tilt and zoom levels to fix, predefined
values. Smart Zoom is disabled. These
buttons are available in 3D mode.
Tap&hold any of the buttons to set its
value to the current tilt and zoom levels,
or to reset it to its original value.
(on n/a
n/a
n/a
n/a
n/a
n/a
rotated, automatic map
53