Selecting A Media Source - Clarion VZ709A Owner's Manual

Selecting a Media Source

When the liquid crystal panel is
closed
1. Press the [SRC] button to switch the source
mode.
Each time you press the [SRC] button, the
source mode changes in the following order:
TUNER mode ➜ DVD mode ➜ USB mode ➜
Bluetooth mode ➜ AUX mode ➜ TUNER
mode...
Note:
• When 2Zone function is ON, the [SRC] button
works only for the Main zone. To switch the Sub
zone source, specify it from the Source screen, or
use the remote control unit.
Available media sources
Source mode Corresponding source
TUNER mode TUNER mode
DVD mode DVD Video mode
CDDA mode
MP3/WMA/AAC mode
DivX mode
USB mode iPod mode
USB Memory mode
Bluetooth mode Bluetooth mode
AUX mode AUX mode
Note:
• When the USB mode is selected, video images input from the AUX terminal will be output to the rear monitor.
This is normal.
To select the BT Phone or Navigation mode
You can select the BT Phone or Navigation mode from the Menu screen displayed by pressing the
[MENU] button.
• For details of the BT Phone mode operations, see "Bluetooth Telephone Operations" (page 49).
• For details of the Navigation mode operations, see "Navigation System Operations" (page 53).
24
VZ709A
media mode
When the liquid crystal panel is
open
1. Press the [SRC] button to display the Source
screen.
2. Touch the desired Source key you wish to
change to.
The system is switched to the corresponding
source media mode.
Refer to
page 26
page 28 The source media mode differs depending
on the data format of the disc set in the
page 35
DVD player.
page 37
When no disc is set in the DVD player,
"NO DISC" will be displayed.
page 40
page 42 The source media mode differs depending
on the type of the USB media device
page 46
connected to the USB connector.
When no USB media device is connected,
"NO MEDIA" will be displayed.
page 47
page 54
Description
—
—
—