Clarion NX700 Owner's Manual & Installation Manual page 101

The following area appears next to the above described rounded area. When tapping this area, the result
depends on the information currently shown.
Icon Information
There is no valid GPS
position
Traffic restriction
Second
(maneuver
,
next maneuver)
Approaching
Safety Camera
Stops
simulation
Route
progress
Indicator strip
If there is no valid GPS
position,
appears here.
When
available but there is no
route to be navigated, the
traffic
upcoming
shown here if there is any.
route event
When GPS position and an
after the
active
available, this field shows
the route event that follows
the next route event shown
in the above described area.
a Road
This icon appears when you
are approaching a Road
Safety
warning
enabled in Settings.
the running
This icon appears during
Route
Simulation, and Track Log
playback.
recalculation
During route recalculation,
this
recalculation
between 0% and 100%.
- sounds muted/enabled
- Track Log recording
- Bluetooth status
Details
this symbol
GPS position is
restriction of the
intersection is
route are both
Camera, and the
for cameras is
Fly Over, Route
field shows the
progress
Action
Tap this area to open the GPS
Data screen to check the signal
status or the connection settings.
Nothing happens if you tap this
area of the screen.
Tap this area to open the Itinerary
screen with the turn by turn
guidance instructions.
Tap this area to suppress the
audible camera warning.
Tap again to display the second
route event with the possibility to
open the Itinerary.
Tap this area to
simulation.
Nothing happens if you tap this
area of the screen.
Tap this area to open the Itinerary
screen with the turn by turn
guidance instructions.
stop the
18