Using The Navigation; Selecting A Destination; Using Combined Search - Clarion NX405 Owner's Manual

3 Using the navigation

By default, NX405 calculates routes using the road network of the maps provided with the product.
You can select the destination and start navigating to it right away (normal navigation) if you need a route
for immediate navigation.
You can also plan a route independently of your current GPS position even without GPS reception. To
achieve this, you need to set a new starting point in the Multipoint Route menu. It also suspends guidance
so that the route is not recalculated when a new position is received. See
You can plan routes with multiple destinations by selecting a first and a second destination and adding it
to your route. You can add as many destinations to your route as you like. See
You can also use NX405 for off-road navigation. See page 64.

3.1 Selecting a destination

You can choose your destination by selecting one of the following options:
•
Using combined search to search among different destination types at once, see page 24
•
Entering a full address or a part of an address, for example a street name without a house number,
see page 27
•
Selecting a Place as your destination, see page 37
•
Selecting a previously saved location as your destination, see page 44
•
Selecting a location from the History of previously used destinations, see page 45
•
Selecting a previously saved route, see page 47
•
Entering the coordinate of the destination, see page 48
•
Selecting a location on the map, see page 50
•
Planning a multipoint route, see page 51.

3.1.1 Using combined search

There are several ways to select your destination. You can initiate a separate search for addresses,
Places, saved locations, or recent destinations, but the fastest way to search for any of these is to use
combined search.
Perform the following steps to use combined search:
1. Tap on the Navigation view to access the Navigation menu.
2. Tap .
24 Clarion NX405 English
Page 54.
Page 51.