Turning The Power On And Off; Setting The Speakers (Sp Select) - Alpine Multimedia Manager PXI-H990 Owner's Manual

Turning the power on and off

This unit does not have a power switch. The head unit to which the unit is connected, controls its
power. In order to protect the speakers when the power is first switched on or when the head unit is
reset, no sound is produced until system is selected in the next item "Setting the speakers". Set the
following item "Setting the speakers".

Setting the speakers (SP SELECT)

First, make the system and speaker settings. The system settings are required before any other
settings can be made. To prevent speaker damage, make sure the selected system and speaker
connections are in correct (see the instruction manual). It is necessary to check the speaker
connection before selecting the system.
Turn off speaker channels that are not in use.
1
Press and hold F
seconds.
2
Press 1 ( ) or 5 ( ), select "M.M.Manager
[Multi Media Manager]", then press 2 (ENT).
SETUP for at least 3
•
Continued
A. PROC.
1( )
2(ENT)
RETURN
F SETUP
•
5( )
ENTER/
Joystick
MENU
SETUP
7
-
EN