Editing Waypoints; Erasing Waypoints - Furuno FCV-1150 Operator's Manual

Entering a waypoint by manual entry of
position
1. Press the MENU/ESC key to open the
menu.
2. Use or to select Data and press the
ENTER key.
3. Use or to select WPT List and press
the ENTER key.
4. Use or to select an empty waypoint
and press the ENTER key. The waypoint
setting window appears, showing current
position in latitude and longitude.
5. Use or to select item desired and
press the ENTER key.
For name For L/L (ex. latitude)
6. Enter latitude and longitude, similar to
how entered waypoint name.
7. Press the MENU/ESC key to register the
waypoint.
8. Press the MENU/ESC key several times
to close the window.
1.18.2

Editing waypoints

1. Press the MENU/ESC key to open the
menu.
2. Use or to select Data and press the
ENTER key.
3. Use or to select WPT List and press
the ENTER key.
4. Use or to select the waypoint to edit
and press the ENTER key. The waypoint
setting window appears.
5. Use or
6. Edit item as appropriate.
7. Press the MENU/ESC key several times
to close the window.
1.18.3

Erasing waypoints

A waypoint currently selected as destination
waypoint cannot be erased.
1. Press the MENU/ESC key to open the
menu.
2. Use or to select Data and press the
ENTER key.
3. Use or to select WPT List and press
the ENTER key.
4. Use or
erase and press the ENTER key.
5. Use to select Erase? and press the
ENTER key.
6. Use to select Yes and press the EN-
TER key.
7. Press the MENU/ESC key three times to
close the window.
17
1. OPERATION
to select the item to edit.
to select the waypoint to