Other Settings; Setting The Clock - Blaupunkt TravelPilot DX-N Operating Instructions Manual

System settings

Other settings

1. Mark on the top line of the "Settings" menu. Press
The sub-menu for other settings will appear.

Setting the clock

You can set daylight-savings time, the current time, the display of the arrival or driving
time and select the time display format as well.
The current time is automatically set via the GPS signal. This is, however, a time
difference of one hour compared to Central European Time (CET) because GPS trans-
mits world time UTC. To make sure that the TravelPilot DX-N operates properly, it will
be necessary to correct this time difference manually.
1. Select "Clock". Press
The "Clock" menu will appear.
2. Select "Time". Press
A menu to set the time will appear.
3. Press to set the local time. Press
The local time set will appear beside the menu item.
The clock will not switch to daylight-savings time or standard time automatically; this
adjustment must be made manually.
4. Select "Dayl. sav. time". Press
Daylight-savings time has been selected when there is a checkmark next to
the menu item.
5. Press to exit the menu.
.
OK
.
OK
.
OK
.
OK
.
OK
56